Comtech EF Data CRS-180 User Manual
Crs-180
Advertising
IMPORTANT NOTE: The information contained in this document supersedes all previously published
information regarding this product. Product specifications are subject to change without prior notice.
Part Number MN/CRS180.IOM / CD-CRS180 Revision 11
CRS-180
70/140 MHz IF 1:1 Redundancy Switch
Installation and Operation Manual
Accessory Product for use only with Comtech EF Data CDM-625A, CDM-625,
CDM-760, CDM-750, CDM-570A, CDM-570, CDM-710G, CDM-710, and
CDM-700 Modems (Modem Firmware and Hardware Requirements Apply)
Advertising
Table of contents
Document Outline
- mn-crs180_11.pdf
- INSIDE COVER
- TABLE of CONTENTS
- TABLES and FIGURES
- PREFACE
- About this Manual
- Conventions and References
- Safety and Compliance
- Product Support
- Comtech EF Data Headquarters
- Warranty Policy
- Chapter 1. INTRODUCTION
- Chapter 2. INSTALLATION
- Chapter 3. SWITCH CONNECTORS and PINOUTS
- Chapter 4. MODEM and SWITCH CONFIGURATION
- Chapter 5. CABLES and CONNECTIONS
- 5.1 Overview
- 5.2 Cabling to the CDM-625 or CDM-625A
- 5.2.1 CRS-180(CDM-625/A Control and IF Interface Connections Using Cabling Kit KT-0000159
- 5.2.2 Modem-to-User Data Interface Connections and Examples
- 5.2.2.1 Modem-to-User Non-IP Data Interface Connections and Examples
- 5.2.2.1.1 EIA-422/232 Interface Example
- 5.2.2.1.2 HSSI Interface Example
- 5.2.2.1.3 Quad E1 Interface Example
- 5.2.2.1.4 G.703 Balanced Interface Example
- 5.2.2.1.5 G.703 Unbalanced Interface Example
- 5.2.2.1.6 ASI Interface Example
- 5.2.2.1.7 Overhead Interface Example
- 5.2.2.1.8 Engineering Service Channel (ESC) Interface Example
- 5.2.2.2 Modem-to-User IP (10/100 Ethernet) Interface Examples
- 5.2.2.3 PMSI Interface Example
- 5.2.2.1 Modem-to-User Non-IP Data Interface Connections and Examples
- 5.3 Cabling to the CDM-760 or CDM-750
- 5.4 Cabling to the CDM-570 or CDM-570A
- 5.5 Cabling to the CDM-710G
- 5.6 Cabling to the CDM-710
- 5.7 Cabling to the CDM-700
- Appendix A. CABLE DRAWINGS
- A.1 Overview
- A.2 Control Interface Cables
- A.3 IF / Data Interface Cables
- A.3.1 Switch-to-Modem / Modem-to-User, Coaxial Cable, RoHS, BNC 50Ω
- A.3.2 Switch-to-Modem / Modem-to-User, Coaxial Cable, RoHS, BNC 75Ω
- A.3.3 Modem-to-User, Splitter Cable, DB-25F((2X) DB-25M
- A.3.4 Modem-to-User, CDM-625/A Data ‘Y’ Splitter Cable, DB-9F((2X) DB-9M
- A.3.5 Modem-to-User, Quad E1 ‘Y’ Splitter Adapter Cable, DB-9M((2X) DB-15F
- A.3.6 Modem-to-User, Quad E1 ‘Y’ Splitter Adapter Cable, DB-9M((2X) RJ-48F
- A.3.7 Modem-to-User, Quad E1 ‘Y’ Splitter Adapter Cable Kit
- A.3.8 Modem-to-User, Overhead User Data ‘Y’ Splitter Cable, HD-44F((2X) HD-44M
- A.3.9 Modem-to-Modem, CDM-625/A Shielded Multi-drop CnC® Plus Cable, DB-9M(DB-9M
- A.3.10 Switch-to-Modem / Modem-to-User, RoHS Coax Cable, BNC 75Ω
- A.3.11 Modem-to-User, Optical Gigabit Ethernet Cable Assemblies, RoHS, Single-Mode OR Multi-Mode, (2X) Type ‘LC’ ( (4X) Type ‘LC’
- A.3.12 Modem-to-User, G.703 Balanced User Data ‘Y’ Splitter Cable, DB-15M((2X) DB-15M
- A.3.13 Modem-to-User, HSSI User Data ‘Y’ Splitter Cable, HD-50F((2X) HD-50M
- A.3.14 Modem-to-User, OC-3 Cable Assemblies, RoHS, Single-Mode OR Multi-Mode, Type ‘SC/UPC’ ( (2X) Type ‘SC/UPC’
- BACK COVER