1 asi 75ω data interface (cdi-40) kit kt/12579 – Comtech EF Data CDS-100 User Manual
Page 104
CDS-100 Diversity Switch
MN-CDS100
Cables and Connections
Revision 1
5–48
5.9.2.1.1 ASI 75Ω Data Interface (CDI-40) Kit KT/12579
Figure 5-40 shows an example for a CDM-710 diversity switching configuration with the CDI-40
ASI data interface installed in Slot 1, and with Slot 2 empty. The figure shows installation of one
KT/12579 ASI Interface Kit.
Be sure to connect to the lower BNC connector pair labeled “1:1” on the CDI-40 ASI
data interface. The Rx port on each interface has been tuned to be 3 dB higher
amplitude to compensate for the presence of the RF/SA32KC-IN/OUT 2-way
combiner.
KT/12579 ASI (CDI-40) 75Ω Interface Kit
CEFD Part No.
Qty Description
CA/BNC75OHM
4
Cable – IF BNC, 75Ω, 1’
RF/SA32KC-IN/OUT
2
Combiner – 2-way w/Bracket, 0.25-300 MHz, 75Ω BNC
Figure 5-40. CDM-710 ASI Interface Example