Comtech EF Data CST-5000 - Manual (Page 73)

CST-5000 C-Band Satellite Terminal Redundant System Installation
Rev. 9 3–19
4. Position the antenna waveguide in place on the RF IN connector, and install the
1/4-20 x 1 inch (25 mm) bolts, 1/4 inch (6 mm) split lockwashers, 1/4 inch
(6 mm) flat washers, and 1/4-20 nuts.
Note: Do not tighten the bolts at this time.
5. After all of the bolts, washers, and nuts have been installed, tighten them
according to the following illustrated sequence.
1
2
3
4
5
6
7
8 9
10
6. Remove the plastic covers from all the connectors, and attach the appropriate
cables.