Install moxa properties, 2 install moxa properties – Comtech EF Data MiniMac Installation ManualOperation Manual Operation Manual User Manual
Page 89
Advertising
MiniMAC Program
MiniMAC Rack Management System
3–10
Rev. 0
3.3.2.2 Install
MOXA
Properties
Select the following Properties as follows:
Selection
Response
Board Type
C3208
Memory Bank
D4000
Interrupt No.
5
First Port COMM No.
COMM11
Click on
Done
Click on
OK
Click on
OK
Restart Computer
Note: All systems will have an identification file of all system parameters.
This data is stored in: A:\BACKUP\IPCONFIG.TXT
Verify the COMM ports with either:
HYPERTERM.EXE
COMMTEST. EXE.
Notes:
1.
Commtest.exe will run the communications port just like the MiniMAC program.
2.
Hyperterm is located within the Windows NT program.
3. Commtest is located at: C:\Program Files\ILCNCS\Commtest.Exe.
Advertising