Comtech EF Data CDM-500 User Manual
Cdm-500
Advertising
Table of contents
Document Outline
- CDM-500 Rev. 1.3 Cover
- Customer Support
- Table of Contents
- Chp 1 INTRODUCTION
- Chp 2 INSTALLATION
- Chp 3 FUNCTION
- Chp 4 PHYSICAL DESCRIPTION
- Chp 5 CONNECTOR PINOUTS
- Chp 6 FRONT PANEL OPERATION
- Description
- Menu Trees
- OPENING SCREEN
- SELECT
- CONFIG:
- (CONFIG) TX (Transmit)
- (CONFIG, TX) MOD (Modulation)
- (CONFIG, TX) FREQ (Frequency)
- (CONFIG, TX) DATA (Data Rate)
- (CONFIG, TX) FEC (Forward Error Correction)
- (CONFIG, TX) ON/OFF
- (CONFIG, TX) PWR (Power)
- (CONFIG, TX) SCRAM (Scrambling)
- (CONFIG, TX) CLK (Clocking)
- (CONFIG, TX) TSI (Transmit Spectral Invert)
- (CONFIG) RX (Receive)
- (CONFIG, RX) MOD (Modulation)
- (CONFIG, RX) FRQ (Frequency)
- (CONFIG, RX) DATA (Data Rate)
- (CONFIG, RX) FEC (Forward Error Correction)
- (CONFIG, RX) ACQ (Acquisition sweep range)
- (CONFIG, RX) DESCRAM (Descrambler)
- (CONFIG, RX) CLK (Clocking)
- (CONFIG, RX) BUF (Buffer size)
- (CONFIG, RX) RSI (Receive spectral inversion)
- (CONFIG, RX) Eb/No (Eb/No Alarm)
- (CONFIG) FRAME (Framing Mode)
- (CONFIG, FRAME) TRANSPARENT
- (CONFIG, FRAME) FRAMED
- (CONFIG, FRAME, FRAMED) EDMAC-ON
- (CONFIG, FRAME, FRAMED, ON) EDMAC MASTER
- (CONFIG, FRAME, FRAMED, ON) EDMAC SLAVE
- (CONFIG) INTFC (Interface)
- (CONFIG) REMCONT (Remote control)
- (CONFIG, LOCAL)
- (CONFIG, REMOTE)
- (CONFIG, REMOTE, BAUD)
- (CONFIG, REMOTE, INTFC)
- (CONFIG, REM, INTFC, ADDR) RS232 BUS ADDRESS
- (CONFIG, REM, INTFC, ADDR) RS485 BUS ADDRESS:
- (CONFIG) MASK (Alarm mask)
- (CONFIG, MASK) AGC
- (CONFIG, MASK) Eb/No
- (CONFIG, MASK) RX-AIS
- (CONFIG, MASK) BUF-SLIP (Buffer slip)
- (CONFIG, MASK) TX-AIS
- (CONFIG) IMPED (IF impedance)
- TEST
- INFO (Information)
- MONIT (Monitor)
- STORE/LD (Store/Load)
- UTIL (Utility)
- Chp 7 CLOCKING
- Chp 8 EDMAC CHANNEL
- Appendix A SUMMARY OF SPECIFICATIONS
- Appendix B REMOTE CONTROL
- Index
- Back Cover