Comtech EF Data M&C Software - Manual (Page 9)

MN/M-C17.IOM 1–1
Chapter 1. INTRODUCTION
The Comtech EF Data monitor and control (M&C) software is a DOS-based program
designed to provide a user-friendly interface for the control and monitoring of Comtech
EF Data C-band and Ku-band satellite terminals.
Note: The M&C software was designed as a DOS-based application. Comtech EF Data
does not support the use of this program in the Microsoft Windows environment.
Specifically, the M&C software provides simplified user control, automatic system
monitoring, and fault logging for terminal system components.
This software operates with single or redundant RF terminal systems. Refer to Chapter 2
for operation information.
1.1 Requirements
The M&C software requires the following:
• IBM PC or compatible computer running DOS version 5.0 or later
• 386SX processor or greater
• 192K or more of available memory (RAM)