Comtech EF Data CMR-6000 Manual - Manual (Page 35)

Digicast Media Router S2 Receiver CMR-6000 Revision 1
Device Management via User Interfaces MN-CMR6000-IOM
4-5
The CMR-6000 Administrative Configuration page contains the following configurable, required
parameters:
User Name
The CMR-6000’s User Name is user configurable and is used for connecting to the unit via IP
management services and terminal services.
The default user name is
comtech .
Password
The Password is used for authenticating a user when connecting via IP management services.
The default password is
comtech .
The password is case sensitive and must be entered carefully.
When the password is changed, enter the password twice for verification.
System Contact
Enter the contact information of the system administrator for support.
System Location
Enter the physical location where the unit has been installed.
Enable Telnet
Use the checkbox to Enable or Disable Telnet application on the CMR-6000.
Update Firmware
These fields are provided to allow for software/firmware changes.