Contemporary Control Systems BASremote Installation Guide - Manual (Page 4)

TD040300-0II
4
Environmental
Operating temperature: 0°C to +60°C
Storage temperature:
–40°C to +85°C
Humidity: 10% to 95%, non-condensing
Universal I/O (Channels 1–6) — Software configurable
All protected for: short-circuit and over-voltage up to 24 VAC
Analog inputs: 10 bit resolution, 0–10 V or 0–20 mA
(Input impedance 100 kΩ on voltage, 250 Ω on current)
Thermistor support: 10 kΩ Type II or Type III
(+40º to +110 ºF / +4.4º to +44ºC)
Digital inputs: dry contact or pulses to 40 Hz with 50% duty cycle
(User scalable, 0–10 VDC or 0–20 mA)
Analog outputs: 12 bit resolution, 0–10 V or 0–20 mA , user scalable
(Max load 750 Ω when using current output.)
Digital Outputs (Channels 7 & 8)
Each channel: ―Form C‖ relay (NO and NC) rated 30 VAC/VDC, 2A
LED Indicators
Status: green/red
Ethernet: green/yellow
I/O Points: green/red
Ethernet Pin Assignments (MDI)
1 TD+ 3 RD+
2 TD– 6 RD–
(The pins below are used only on BASR-8M/P.)
4 +48 VDC 7 0 V
5 +48 VDC 8 0 V
Mounting DIN-rail or panel-mount
Shipping Weight 1 lb. (.45 kg)
Figure 1 — RJ-45 Jack