Crate Profiler5 - Manual (Page 4)

Profiler Model 5 Compact Stereo Guitar Amplifier with DSP
Profile Tracking
Your Crate Profiler Model 5 gives you the power of Profile Tracking. Once you select a DSP
setting for each profile, Profile Tracking stores the settings to memory whenever you change
profiles. When you go back to that profile, Profile Tracking recalls those DSP settings auto-
matically, without changing the DSP controls!
For example:
• Select a Clean profile. Set the Effects control to “Flanger,” the Delay control to “Multi,” and
adjust the Reverb control to your preference.
• Select a Medium Gain profile. Set the Effects control to “Chorus,” the Delay control to
“Single,” and readjust the Reverb control to a different setting. (The DSP settings for the
Clean profile are now saved to memory.)
• Select a High Gain profile. Set the Effects control to “Phaser,” the Delay control to another
“Multi” setting, and readjust the Reverb control once again. (The DSP settings for the
Medium Gain profile are now saved to memory.)
• Reselect the first Clean profile. (The DSP settings for the High Gain profile are now saved
to memory.)
When you reselected the Clean profile, the DSP settings previously stored in memory were
automatically recalled. Switch to the Medium Gain profile and the DSP settings you just stored
are still there. You can change the DSP settings at any time. Once you set the DSP and select
another profile, Profile Tracking stores the settings for you. Even when the amplifier is turned
off, the DSP settings are stored and recalled the next time you turn it on. That’s the power of
Profile Tracking!
4