Crate V5 - Manual (Page 4)

V5 Tube Guitar Amplifier
4
The Front Panel
1. INPUT: Use this jack to connect your
guitar to the amplifier using a shielded
instrument cable.
2. VOLUME: Use this to adjust the gain
and channel overdrive. With the control
turned counter-clockwise, the gain is
low and very little distortion is present.
As you rotate it clockwise, the gain
increases, producing more overdrive
distortion, and a higher output volume
level.
3. TONE: This adjusts the overall tone of
the sound. Turning the control clockwise
increases the higher frequencies for a
brighter, crisper sound. Turning the con-
trol counterclockwise reduces the higher
frequencies for a darker sound.
4. LAMP: This illuminates when the ampli-
fier is turned on.
5. ON/OFF SWITCH: Use this switch to
turn the amplifier on and off.
INPUT
1
0 1 0
2
3
4
5
6
7
8
9 1
0 1 0
2
3
4
5
6
7
8
9
VOLUME TONE
POWER
O N
1 2 3 4 5