Crest Electronics CRE57074 RCC REMOTE SWITCH DEVICE 2.4 GHZ - Manual

CREST/ARISTO-CRAFT RCC REMOTE SWITCH DEVICE 2.4 GHZ
INSTRUCTION MANUAL CRE 57074
Features
1. Five Switch Ports
2. Multi-SW Functions [1T0 5]
3. Polarity Protection
4. Switch Type Speeds [ FAST / SLOW]
5. Switch in Use Busy Signal
6. Timer settings [ .5s To 5.0s]
7. Wide operating input voltage 6v To 24v DC
System Components
A.Remote Switch Device See Fig 1
Remote Switch Device Connections
BEFORE ANY INSTALLATION; MAKE SURE THERE IS NO POWER TO THE TRACK OR
TO THE REMOTE SWITCH DEVICE. The Remote Switch Device is designed to work on
track power or battery power of at least 6volts DC to a maximum of 24 volts DC. This unit is
self-protected for polarity and input current. Aristo Craft carries a battery box to work with the
Remote Switch Device, CRE 55612 if you do not have track power available.
This Remote Switch Device will handle from one to five switches or accessories each.
Page 1