Cybex 18080 Bravo Pro - Manual (Page 16)

16
Cybex Owner’s Manual
Weight stack decals
1. Choose the appropriate decal; pounds, kilograms or both.
2. Peel off back cover of decal. When peeling off back cover, make sure the decals remain
attached to the front sticker.
Front
Sticker
Back Cover
Decal
Description
1 Front Sticker
2 Decal
3 Back Cover
3. Align holes in decal with appropriate holes in weight stack. Do not allow the adhesive to touch
weight stack at this time.
4. Insert a guide pin through each hole of the template. A guide pin can be anything that fits
through the weight stack hole, such as a weight stack selector pin.
5. Align decal and rub it onto weight plates.
6. Remove front side, leaving decals adhering to weight plates.
1 2
Description
1 Pounds
2 Kilograms
Install shrouds
Verify proper operations