5 - maintenance – Cybex 8820 Bravo Bench User Manual

Page 12

Advertising
background image

Page 6

Product Number 8820 Owner’s Manual

1. Using a rubber mallet, carefully strike foot glide.

2. With a flat blade screwdriver, carefully pry off foot glide.

3. Carefully place rubber foot (supplied with machine) on foot of frame.

Product No. 8820

Total Weight and Size
Weight: 18.5 lbs. Size: 15.5” W x 21” L x 16.5” H
Weight: 8.40 kg. Size: 39.37 cm W x 53.34 cm L x 41.91 cm H

5 - Maintenance

All preventive maintenance activities must be performed on a regular basis. Performing routine preventive
maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment.

NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your machines.

Instruct all personnel in equipment inspection and maintenance actions and also in accident
reporting/recording. Cybex phone representatives are available to answer any questions or concerns
that you may have.

1. Upholstery - Wipe down all upholstery.

2. Frames - Wipe down all frames using a mild solution of warm water and car wash soap. Be sure to dry thoroughly.

AVOID acid or chlorine based cleaners and also cleaners containing abrasives as these could scratch or

damage the equipment.

3. Chrome - Clean chrome tubes, first using chrome polish and then using a car wax seal. Neutral cleaners

with a pH between 5.5 and 8.5 are recommended. Be sure to dry thoroughly. AVOID acid or chlorine based

cleaners and also cleaners containing abrasives as these could scratch or damage the equipment.

1. Inspect all nuts and bolts for looseness. Tighten as required

2. Inspect all labeling for readability. This includes instructional placards, warning and caution decals. Replace all worn
labeling

immediately.

Weekly Procedures

Daily Procedures

Advertising