Cybex 11020 Eagle Incline Pull - Manual (Page 10)

10
Cybex Owner’s Manual
7. Remove bolt, washer and hex nut securing the pulley to the pulley bracket.
8. Remove pulley from pulley bracket.
9. Remove one of the two BHSCS (Button Head Socket Cap Screws) securing the pivot shaft.
BHSCS
Pivot Shaft
Washer
Pulley Shaft
Pulley/Cable
10. Remove the pivot shaft and pulley shaft.
CAUTION: Be extremely careful when removing shaft so you do not ruin the threads on
the shaft.
11. Remove the five BHSCS securing the two halves of the frame.
BHSCS (qty 2)
Nylon Locknut (2)
Nylon Locknut (3)
BHSCS (qty 3)
12. Move each half through the doorway to the desired location.
13. Attach each half together using the five BHSCS.
BHSCS (qty 2)
Nylon Locknut (2)
Nylon Locknut (3)
BHSCS (qty 3)