Cybex 11030 Eagle Row - Manual (Page 10)

10
Cybex Owner’s Manual
7. Remove pulley from pulley bracket.
8. Using a Phillips screwdriver, remove the two screws securing the cam cover plate (guard)
and remove the plate.
Cam Cover Plate
Screw
9. At the opposite end of the pivot shaft, locate the small plate.
Small Plate BHSCS (2)
10. Using a 7/32” Allen wrench, remove the two BHSCS securing the small plate and remove the
plate.
11. Remove one of the two BHSCS securing the pivot shaft.
BHSCS
Pivot Shaft
Washer
Pulley Shaft
Pulley/Cable
12. Remove the pivot shaft.
CAUTION: Be extremely careful when removing shaft so you do not ruin the threads on
the shaft.
13. Rotate cam so that the flat part is facing down.
14. Slide pulley shaft out of machine.