Cybex 11090 Eagle Abdominal User Manual

Page 12

Advertising
background image

12

Cybex Owner’s Manual

4. Lift top weight and turn the Increment Weight Adjusting Knob to select 15 lbs (three

increment weights each side.)

5. Remove the three Phillips head screws securing the top (back) shroud and carefully remove

the shroud.

Phillips Head

Screw (3)

6. Loosen but do not remove bottom two screws.

Screw (loosen -

do not remove)

7. Remove the top two screws securing the back shroud.

Screw

8. Slide rear shroud assembly upward and remove.

Install the weight stack

1. Note how the increment weights are installed.
2. With an assistant holding the increment weights, move the adjusting knob to 0 lbs and

remove all six increment weights (three each side.)

3. Using an external snap ring pliers, remove the upper snap ring from one of the guide rods

and carefully lower the guide rod.

Upper snap ring

Lower snap ring

Frame

Guide rod

Wave washer

4. Remove lower snap ring and wave washer from the guide rod. Repeat for the opposite guide

rod.

Advertising