Cybex 16120 Plate Loaded Smith Press User Manual
Page 14
Cybex Plate Loaded 16120 Smith Press Owner’s Manual
14
6. Cable Installation.
•
Locate two Hex Head Cap Screw HHCS from shipping package.
•
Place a small drop of loctite on HHCS and in threaded hole.
•
Using a 7/16” wrench, attach cable end to weight bar bracket with HHCS. Cable end must
be attached straight to avoid a kink in cable.
•
Repeat step 6 for opposite cable end.
HHCS
Cable
End
Cable
Weight Bar Bracket
Cable end must be attached
straight to avoid kink in cable.
7. Securely anchor machine to the floor using the anchor holes provided in each machine.
CAUTION: Cybex is not responsible for the actual anchoring of equipment. Consult with
a professional contractor.
WARNING: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2
bolts or better).
WARNING: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim
any leg or frame not in contact with surface using flat washers.
8. Verify proper operation.