Cybex 16150 Plate Loaded Squat Press - Manual (Page 10)

10
Cybex Owner’s Manual
2. Repeat the above procedure for the opposite side.
3. Place weight tube in frame. See diagram above.
4. Align threaded weight tube hole with hole in frame.
SHCS
Weight Tube
Loctite
Hole
Threaded Weight
Tube Hole
5. Place a drop of loctite (supplied with machine) on SHCS and threaded hole of tube. See
diagram above.
6. Secure weight tube in place useinga 5/16” Allen wrench an the SHSC removed earlier.
7. Repeat the above procedure for the opposite side.
Securely anchor machine to the floor
Cybex strongly recommends to maximize stability, equipment must be secured to a solid level
surface.
WARNING: Anchoring equipment:
• Cybex is not responsible for the actual anchoring of equipment. Consult with a
professional contractor.
• Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or
better).
• If legs/frame does not contact surface, DO NOT pull down with anchors. Shim
any leg or frame not in contact with surface using flat washers.