Cybex 13060-999 VR1 Seated Leg Curl User Manual
Page 14
Advertising
Cybex Owner’s Manual
14
3. Place weight stack pin in each plate to verify proper installation.
4. Lift top weight up and down simulating normal operation (without selecting any
resistance).
5. Verify that the cable is moving smoothly and is routed straight from the pulley bracket
to the top of the weight plate connector.
Install back shroud
1. Place shroud into position.
2. Secure top in place using two BHSCS and 7/32” Allen wrench.
Verify proper operation
Advertising
This manual is related to the following products: