Daktronics Fiber Ethernet Communication User Manual
Primary display - rear, Identify primary display, Route fiber cable to communication enclosure
Quick Guide: Fiber Ethernet Communication Installation
P.O. Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel: 866-343-3122 fax: 605-697-4700
www.daktronics.com email: [email protected]
DD1417581Rev 0
10 September 2008
PRIMARY DISPLAY - REAR
1.
Identify Primary Display
4.
Route Fiber Cable to
Communication Enclosure
6.
Attach Quick Connect
Cables to J32 and J33 Jacks
7.
Connect Computer to Network
2.
Mount Communication Enclosure
(within 25 ft. of display)
5.
Connect Fiber Cable to Media Converters
(RX to TX and vice versa)
3.
Route Quick Connect
Cables to Display
Ethernet 10BASE-FL
to 10BASE-T
Media Converter
E-TBT
-FRL-05
10BASE-T
10BASE-FL
LINK ALER
T
ENABLE DISABLE
Ethernet
10BASE-FL to 10BASE-T
Media Converter
E-TBT-FRL-05
10BASE-T
10BASE-FL
LINK
ALER
T
ENABLE DISABLE
Computer
Running
Venus 1500
Network Switch
Fiber Cable
1.2 mi. max
Network Connections
Inside Building
Media Converter
Inside Enclosure