Daktronics Configuring the DM-100 for Generic Interface - Manual

Configuring the DM-100 for Generic Interface page 1 of 2
DD1750101 Rev 0
3 February 2010
PO Box 5128 201 Daktronics Drive, Brookings, SD 57006-5128
tel: 866-343-3122 fax: 605-697-4700
www.daktronics.com
1.1 Preparation
The DM-100 function must be set to GAS PRICE. The current function of the DM-100 is
displayed during power up. To change the function, cycle power to the DM-100, and press the
SET FUNCTION key when prompted.
Note: The cable used to connect the DM-100 and POS system is supplied by the customer.
1.2 Configuration
LCD Screen Action
POS SETTINGS
ENT TO MODIFY
↓↑
POS INTERFACE
GENERIC
↓↑
LINE 1
PRODUCT: 0001 *
LINE PRICE
1
↓ $X.XX 9/10
POS CONTROLLED
1
↓ $X.XX 9/10
Press the MENU key and use the

and
‚
keys
to scroll to the POS SETTINGS menu item. Press
ENTER.
Select the POS type by using the

and
‚
keys to
scroll to Generic. Press ENTER.
Each price in Generic is uniquely identified by a
product ID. Use the

and
‚
keys to select a
grade for the line. (If a line is not used, select
NONE. Press ENTER.
Select a corresponding product ID for each display
line. When this menu is reached, all lines have
been configured. The POS interface configuration
is complete.
Currently configured prices will be shown in the
format shown at left.
1.3 Changing Prices
Each display line for which a price category is configured will automatically update when the
price is changed in the POS system. Attempting to manually edit prices that are configured for
POS control will cause the following screen to appear:
LCD Screen Action
THIS LINE POS
CTRLD. OVERRIDE?
To manually edit the price, press ENTER. To
cancel, press CLEAR. To continue, press ENTER.
1.4 Troubleshooting
Verify communication from DM-100 to sign: