Section 3, Mounting instructions -1 – Daktronics AE-3010-7.6-R,G,A User Manual
Page 71
Advertising
Section 3:
Mounting Instructions
Reference Drawings:
Enclosure, Signal Converter, Base .................................................Drawing B-200645
The signal converter can be either wall or table mounted. Do not mount the signal converter
from the ceiling or the underside of a table.
To mount the signal converter refer to drawing B-200645. Secure the signal converter using a
screw though the mounting holes at the the back of the enclosure. Do not fully tighten the
screws.
Figure 11: Signal Converter Enclosure
Mounting Instructions
3-1
Advertising