Deni Double Burner 16320 - Manual (Page 3)

Temperature Dials
Indicator Lights
Heating Surfaces
Power Dial
®
2
position, to set the desired temperature of the desired
heating surface. The indicator light for the selected
heating surface will illuminate. (MIN is low heat, MAX
is high heat) The indicator light will go on and off as the
temperature is reached.
CAUTION: The metal surfaces will become hot. Do not touch
while in use.
Note: When using the burner for the first time, there may
be a smell of smoke coming from the surface of the heating
elements. This is normal, due to the invisible protective
coating during production.
3. When you are finished using the burner, turn the
temperature dials to the MIN position and the power
dial to the OFF position. Unplug the power cord. Allow
the unit to cool before moving or cleaning.
MAINTENANCE AND CARE
1. Be sure the unit is unplugged from the wall and is cool
before cleaning.
2. Do not immerse the unit in water to clean.
3. Use a damp soapy cloth or sponge to clean the unit.
Do not use harsh abrasives or metal scrubbing pads to
clean the unit.
4. Store the burner in a clean dry place.
HINTS AND TIPS
■
Do not use unstable pans. Be sure to use flat bottom
pans to insure full contact with the heating surface for
maximum heat efficiency.
FEATURES
BEFORE FIRST USE
1. Clean the burner with a soft damp cloth. Place the
burner on a flat, level surface near an electrical outlet.
2. Be sure the unit is in the OFF position before plugging
in.
3. Always use flat bottom cookware that makes close
contact with the heating element. Ideally, the cookware
should be 7”- 8” in diameter. Keep the surface of the
heating element clean and dry.
HOW TO OPERATE
1. Put water and/or food in the cookware. Do not fill more
then 80% of the cookware, as it will overflow. Cover and
place on the burner.
2. Plug the unit in. Turn the power dial to the ON position.
Turn the temperature dials from the MIN to MAX