Daktronics Sportsound 500HD - Manual (Page 36)

14
DISPLAY
LENGTH
(FT.)
16
18
20
25
28
32
36
A
(FT)
B
(FT)
TABLE 2
4'-9" 6'-3"
5'-0" 7'-0"
5'-3" 7'-9"
5'-6" 8'-6"
6'-10" 9'-8"
7'-4" 10'-8"
7'-0" 13'-0"
6'-10" 15'-4"
3'-6"
DEPTH
SS500HD
WT: 850LBS
DISPLAY LENGTH
8'-0"
LENGTH
B B
A
GRADE
2'-9"
22" MAX.
SIDE PANEL SIDE PANEL
DISPLAY
HEIGHT
GRADE
DISPLAY HEIGHT IS MADE UP OF
ANY COMBINATION OF SCOREBOARDS,
AD PANELS, TRUSSES, AND MESSAGE
CENTERS.
FRONT VIEW SIDE VIEW
TOP VIEW
(STRUCTURE ONLY)
HSS4X4X3/16
OPTIONAL SUPPORT FOR
SIDE PANEL MOUNTING.
FOR SPACING SEE TABLE 2.
TUBES TO BE CUT FLUSH WITH
THE BACK OF THE HORIZONTAL
STRINGER.
FOR STRINGER SIZE
REFER TO DAKTRONICS DRAWING:
1561-E10B-982267
VARIOUS
DISPLAYS
GRADE
0' 0"
MAX. HEIGHT
40' 0"
FOR SIDE AD/TRUSS ATTACHMENT TO TUBE
REFER TO DAKTRONICS DRAWING:
1348-E10B-1111650.
STRINGER
LENGTH
12'-11"
14'-5"
15'-11"
17'-5"
19'-9"
21'-9"
26'-5"
31'-1"
3'-0"
FRONT OF HORIZ. TUBE FLUSH
WITH FRONT OF THE COLUMNS.
INSET W4X13 VERTICAL BEAM
1/4" FOR WELD.
NOTES:
1.0 REFERENCE
1.1 REFER TO DAKTRONICS DRAWING: 1561-E10B-969776 FOR
SPORTSOUND 500HD ENGINEERING SPECIFICATIONS.
1.2 REFER TO DAKTRONICS DRAWING: 1561-E10C-982267 FOR
SPORTSOUND 500HD MOUNTING DETAILS AND RECOMMENDED
STRINGER SIZE.
1.3 REFER TO DAKTRONICS RISER DIAGRAM FOR ALL ELECTRICAL
POWER AND DATA SPECIFICATIONS.
1.4 THE SHOWN SYSTEM IS PROVIDED TO ASSIST WITH
ESTIMATING INSTALLATION COSTS AND ARE NOT INTENDED FOR
CONSTRUCTION PURPOSES. THE DESIGN MUST BE CERTIFIED BY A
PROFESSIONAL ENGINEER LICENSED IN THE STATE OF THE
INSTALLATION BEFORE THEY CAN BE USED FOR FABRICATION OR
ERECTION.
2.0 GENERAL NOTES
2.1 ALL DIMENSIONS ARE IN FEET AND INCHES.
2.2 REFER TO INSTALLATION AND MAINTENANCE MANUAL FOR
COMPLETE INSTALLATION INSTRUCTIONS.
3.0 SOUND CABINET NOTES
3.1 DAKTRONICS SOUND CABINET IS STEEL CONSTRUCTED
SKELETON WITH ALUMINUM PANELING FASTENED TO ITS
EXTERIOR.
3.2 LIFTING POINTS ARE PROVIDED BY DAKTRONICS. WHEN
SYSTEM. ALIGN LIFT EYES WITH CABLES.
3.3 REMOVE SHIPPING BRACKETS FROM TOP OF CABINET. 3.4
PAINT COLOR:
SPEAKER CABINET COLOR: POWDER COAT BLACK.
4.0 STRUCTURAL NOTES
4.1 FABRICATION AND ERECTION SHALL CONFORM TO THE LATEST
EDITION OF AISC SPECIFCATIONS.
4.2 ALL WELDING (SHOP AND FIELD) SHALL BE PERFORMED IN
ACCORDANCE WITH AWS D1.1-LATEST EDITION SPECIFICATIONS
BY A CERTIFIED WELDER USING E70XX ELECTRODES.
4.3 INTERNATIONAL BUILDING CODE 2006 USED IN DESIGN OF
SPORTSOUND CABINET SUPPORT MEMBERS WITH, IMPORTANCE
FACTOR=1, Kzt=1.0, Kd=0.85, G=0.85, Cf=1.8, z=40ft AND EXPOSURE
C. SEISMIC DESIGN WAS NOT CONSIDERED.
4.4 THE DESIGN WIND PRESSURES WERE SHIFTED AND ADJUSTED
TO ACCOUNT FOR ASCE 7 PRESCRIBED OFFSET EFFECTS.
4.5 ALL STRUCTURAL STEEL SHALL BE ASTM A36
(36 KSI) EXCEPT:
- WIDE FLANGE SHALL BE A992 (50 KSI) STEEL
- TUBING SHALL BE A500-B (46 KSI)
4.6 ALL OPEN TUBE ENDS SHALL BE CAPPED AND WELDED ALL
AROUND.
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS
DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT
REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED
WRITTEN CONSENT OF DAKTRONICS, INC.
COPYRIGHT 2011 DAKTRONICS, INC.
DAKTRONICS, INC.
BH
DRAWN: DATE:
SHEET JOB NO: REV
DAKTRONICS AUDIO SYSTEMS - SPORTSOUND 500HD
SIDE PANEL MOUNTING DETAILS W/ SS500HD
DTREML 22 MAR 10
P 1561 E 10 B
3/16"=1'
MSHRESTHA
992088
04
DATE: REV BY:
01 9 JUN 11 MBJ
UPDATED SIDE VIEW
27 7'-2" 10'-4" 21'-1"
DATE: REV BY:
02 10 FEB 12 KCS
ADDED 27' DISPLAY TO TABLE
500HD CABINET MOUNTING TUBES
REFER TO DAKTRONICS DRAWING:
1561-E10B-982267
DATE: REV BY:
03 23 APR 12 JLR
REPLACED HSS VERT TUBES WITH W4X13
FOR AD PANEL MOUNTING
DATE: REV BY:
04 23 JAN 13 KCS
MADE OPTIONAL SUPPORT TUBES FOR AD PANELS
FLUSH WITH THE REAR OF THE HORZ STRINGER
ISOMETRIC REAR VIEW
SS500HD W/ SIDE AD
MOUNTING TUBES & BEAMS
SS500HD
ALL TUBES SHALL
BE CAPPED.
CUT TOP OF VERTICAL SUPPORT STEEL (3'-0")
TO BE FLUSH WITH TOP OF
SIDE PANEL IF REQUIRED.
A
DETAIL A
SCALE 1:32
HSS4X4X3/16
SUPPORT FOR SS500HD
AND SIDE PANEL MOUNTING.
TYP.
3/16
TYP.
W4X13 FOR SIDE AD
PANEL MOUNTING.