Daktronics Sportsound SSR-300 Quick Start Guide - Manual (Page 3)

Sportsound SSR-300 Quick Start Guide 3 of 6
DD2222144 Rev 2
05 March 2014
201 Daktronics Drive PO Box 5128, Brookings, SD 57006-5128
Tel: 1-800-DAKTRONICS (1-800-325-8766) Fax: 605-697-4746
Web: www.daktronics.com/support
Audio Mixer Operation
REMEMBER: Bad input = bad output.
No adjustment on the mixer can make
a poor source sound better. For best
results, be sure to use high-quality audio
files from your MP3 player or laptop,
and set the device to near full volume.
Bring sliders up
slowly and listen
for your signal.
Verify gain knobs for the
channels in use are adjusted
so the SIGNAL light is green
and the PEAK light is not lit.
Ensure all source equipment is
turned on and operational (refer to
the appropriate pages of this guide).
Press the USER
DEFINED KEY
labeled GAME.
Custom keys may
have been set up
during training.
Press the desired
key as needed for a
specific application.
Ensure the ON buttons
for the channels in use
and for the STEREO
slider are illuminated.
Also verify no SOLO
buttons are illuminated.
The signal should be visible on the STEREO output meter:
• The amber LEDs indicate that the level is near clip.
• The red LEDs indicate that the signal has reached the digital limit.
With the SOUND SYSTEM key switch in the ON position:
1. 2. 3.
4. 6.
5.