Dataprobe Serial iBootBar - Manual

iBootBar V1.3x
Page 1
Scope of this Document:
This document covers the installation and operations of Dataprobe’s Serial iBootBar (sBB) series of remote power
control units. These 1U rack mounted power strips are controlled via RS-232 serial communications and via
contact closure inputs. The following models are covered in this document:
Model Power Feed / Total Capacity Outlets
sBB-N15 NEMA 15 Amp 8 x NEMA 5-15
sBB-C10 IEC C14 10 Amp 8 x IEC C13
Serial iBootBar
Installation and Operations
Ref: sBootBar_v130307e
Front Panel, All Units
Rear Panel sBB-C10
Rear Panel sBB-N15