Dataprobe PowerPal Dual - Manual

Technical Support Hotline: (201) 967-8788
Technical Support: 201-934-5111
Main: 201-934-9944
[email protected]
Website: dataprobe.com
PowerPal EXP uses a dial telephone line to remotely
control A/C power. The user can turn power ON, OFF or
Power Cycle (Reboot) by entering DTMF digits using an
ordinary tone dial phone. The phone line connected to PAL
can also be used by other equipment in a normal manner
after control of power. With one phone call, you can
power up, down or reboot equipment then ring the
telephone device connected to PowerPal EXP’s Extension
port. Power control can be expanded to
two independent outlets with the addition of a K-103
power switch module.
Pal works by listening for dialing tones (DTMF) after it answers a call. If these tones are heard, Pal will
respond with a prompt and the user can access either of the two outlets. Power status on either outlet
information is provided by tones and additional dialing tones control the power. Once power control is
completed, the device on Pal’s Extension may (or may not) be rung.
Three call answering modes, security features and power control options make PowerPal EXP both easy
to use and very flexible.
PowerPal-EXP
PP-NC-03, PP-NC-03-220
Expandable Power Controller
# 1410014, 1410019
P A L
POWER
A/C Source
Dial Line
Line Ext
Switched AC
Outlet # 1
Any Telephony Device:
Phone / Fax / Modem
Power Controlled Devices
PAL
POWER
PowerPal EXP
PP-NC-03
Functional Diagram
A/C Source
Power Controlled Devices
K-103
Switched AC
Outlet # 2
Doc Ref: PP-NC-03_1410014_V021024D