DFI AR100-DR - Manual (Page 17)

17
2
Hardware Installation
4. Unlock the socket by push-
ing the lever sideways,
away from the socket, then
lifting it up to a 90
o angle.
Make sure the lever is lift-
ed to at least this angle
otherwise the CPU will not
fit in properly.
Lever
CPU
Overview
The system board is equipped with Socket AM2+ for installing an AMD CPU de-
signed for this socket.
Installing the CPU
1. Make sure the PC and all other peripheral devices connected to it has been
powered down.
2. Disconnect all power cords and cables.
3. Locate Socket AM2+ on the
system board.