DH Satellite 60 Heavy Duty Polar/Powered Dec - Manual

INSTALLATION INSTRUCTIONS FOR THE
HEAVY DUTY 60” POLAR MOUNT
Congratulations, you have now purchased the finest Polar Mount available. This unit
has been designed to give you the most stable system to work on a single pole application.
Assemble using these instructions. If you have any questions call 608-326-8406 for help.
The Polar Mount is designed to go with the 3.0M, 3.7M, 3.8M, 4.2M and the 4.5 Meter
DH antenna. As all are identical in theory, we will cover the basic installation first and address
each individually as the installation requires.
PLEASE READ COMPLETE INSTRUCTIONS BEFORE BEGINNING INSTALLATION!!
PARTS LIST
1- DH Antenna
1- Polar Mount
60” Back Ring
1- 5 ½” I.D. Base Can
4- Back Braces for 3.3M –See Note*
(8 for 3.7M – 5M)
1- Feed Collar
1- Locking Bar
4- Feed Struts
1- Bolt Bag To Include All Hardware
(See Page 3)
*3.3m Discontinued After 1-1-2013
*3.9m Discontinued After 1-1-2013
***Options: TX Base Stand, base post,
non-penetrating roof mount, hot dip
galvanizing, 36” actuator & electronics
DH Satellite
PO Box 239
Prairie du Chien, WI 53821
Phone: (608) 326-8406
Fax: (608) 326-4233
Sectional antennas must be handled with care not to
twist or distort sections while handling for installation.