D-Link DCS-5300 - Manual (Page 75)

75
Current Year Settings And Camera Selector for the Recording function
The Date-time selector in Section 7 (see above) will change the year
concurrently. If you change the year with the Date-time selector, the current
year setting will also be changed.
The following is the Camera selector:
Here you can make two kinds of schedules: a schedule associated with a specific
camera, or a general schedule that is not applied to a specific camera.
If you want to make a schedule that does not belong to any camera, select the
first row for editing.
If you want to create a schedule for a specific
camera, then click on the row of the camera you
wish to schedule. Select the Open and End
Times. Add any other settings you wish to make.
Click the Add icon to save the changes.
Using IP surveillance Software (continued)
By default, the scheduler is running with the
current date selected on the time-lines and
Date-time picker. Therefore, the current
scheduling year is the year that you run the
scheduler tool. To change the year setting:
Use the up (increase) and
down (decrease) arrows to
adjust the year setting.
Camera
Add selected
period schedule
Erase selected
period schedule