Digi-Star ST 3400 - Manual (Page 42)

Quick Reference
QUICK REFERENCE
MANUAL – Manual Mode
1. Verify control box switch is set to MANUAL.
2. Follow manufacturer’s instructions to operate seed tender.
AUTO – Automatic Scale Mode
1. Set control box switch to AUTO.
2. Press (BIN) to select seed tender bin. Remains in TOTAL when
BIN function disabled.
3. Use keypad to enter PRESET weight, press (ENTER) to store.
Display will show “PRESET STORED”.
4. Move seed chute to planter hopper.
5. Dispense seed to planter; hold down seed chute button if
needed.
6. Auger will turn off automatically when reaching PRESET weight.
7. Repeat steps 4-6 to finish filling planter.
Auger Tolerance
Enter D.A.N. 442 to adjust auger tolerance; TOLER = entered weight
value; T MTHD stays at “WEIGHT”. If seed tender is dispensing too
much seed, increase TOLER weight by the amount of overfill. If tender
is dispensing too little seed, decrease TOLER weight.
Setting and Clearing BIN Weights
1. Press (BIN) until desired seed tender bin is displayed.
2. Enter BIN weight with keypad.
3. Press (BIN) to store weight.
4. Press and hold (ZERO) to clear BIN weight.
38 ST3400 User’s Manual D3943 Rev C