Com port setup, Technical support, Helpdesk – Digi-Star DataLink User Manual
Page 10
Advertising
![background image](/files/781493/content/doc010.png)
Installation
D3869-GB Rev B RF DataLInk User manual
7
Com port setup:
• Continue by selecting “DataLink” and check the boxes as shown in fig. 7.
• Click on “Auto Detect” and wait until the software has found the com port.
• Click “OK” to save the settings and close the window
TECHNICAL SUPPORT :
Helpdesk:
If you are having problems during the installation and setup please contact our help desk. Check
Fig. 7
Advertising