Rear leg assembly – Digi-Star John Deere JD1790 New Style (2004) User Manual
Page 5
Advertising
Scale Bracket and Load Cell Mounting Installation
D3861-US – Rev A
John Deere Planter Scale
3
Rear Leg Assembly
1. Assemble the load cell assemblies as shown.
IMPORTANT
: The load cell arrow located on the end of
both REAR LOAD CELLS needs to be pointed UP.
2. Support the side of the hopper unit.
IMPORTANT
: The lifting chains,
bucket attachments, loader/skid steer
or winch must be capable of lifting
and controlling 1000-1500 lbs.
Remove leg and install the load cell
assembly. Use the existing bolts on
the top and bottom bracket. Use the
3/4" x 4” bolts to hold the load cell in
place. Tighten all bolts and repeat for
opposite side.
Advertising