Digi-Star John Deere/Orthman Mfg JD 1720 Deere CCS - Manual (Page 7)

Scale Bracket and Load Cell Mounting Installation
D3880-US – Rev B John Deere Planter Scale 5
Rear Load Cell Assembly
1. Jack and support hopper, either the right or left hand side. Figure 4 shows one method for supporting
the hopper. IMPORTANT : The lifting chains, bucket attachments, loader/skid steer or winch or jack
must be capable of lifting and controlling 1000-1500 lbs.
Unbolt and remove the existing rear supports to make room for new load cells and rear support
assemblies.
If you are installing scale kit onto the following Planters:
•
JD1720 30” or JD1720 38/40” row spacing use Figure 7.
•
JD1720 22”/36” row spacing use Figure 8.
FIGURE 4 FIGURE 5
FIGURE 6