Recharg, Before charging battery or welding – Digi-Star Cab Control 2400 User Manual
Page 3
Advertising
Operators Manual
D3820-US 3
BEFORE CHARGING BATTERY OR
WELDING
Important Precaution
Disconnect all indicator leads before charging battery or welding.
Damage may occur to indicator.
Note:
All illustrations are the EZ3600 Cab Control. Keys used in this
document are in same general location on all models.
If power supply low,
recharge
battery – turning off
and
lo pwr
will display.
Note:
If
lo bat
displayed,
indicator power (not Cab Control)
is low.
Recharg
Advertising
This manual is related to the following products: