DNF Controls Tally Manager - Manual

Page 1 of 16
TALLY MANAGER Tally Control System
Getting Started Guide
Prior to configuring Tally Manager, assign and configure the control protocols on the
Device Controller channels. Refer to the DC20 Device Controller User Manual.
1.
Create Tally Manager DC List ...................................................................................... 2
2. Backup and Restore the Tally Manager DC List Configuration File .......... 4
3. Configure Channel Mode in Protocol Assignment Table ................................ 6
4. Configure Router Inputs Table ................................................................................... 7
5. Configure Switcher Inputs Table............................................................................. 10
6. Configure Monitor Wall Inputs Table .................................................................... 12
7. Configure Camera Tallies Inputs Table ................................................................ 16
12843 Foothill Blvd. Suite C
Sylmar, California 91342
V: 818.898.3380
F: 818.898.3360
[email protected]
www.dnfcontrols.com