Eclipse Rackmount XMP Series - Manual (Page 15)

Page 15 -- ML40V02A -- www.EclipseRackmount.com
XMP-17
For the 1st and last display,
push the set switch upward
Set switch
For other daisy chain displays,
push the set switch downward
LINK OUT IN OUT
RS-232C
Cat 5 / 6 cable
max. 300 meters
up to 64 displays Daisy chain up to 1,000
meters and 64 displays
RJ-45 jack
IN OUT IN OUT
Cat 5 / 6 cable
max. 300 meters
Cat 5 / 6 cable
max. 300 meters
15' serial cable
( extender required for lengths longer than 15' )
< 3.2 > Options : MCS
The MCS solution is able to control the OSD of
various CyberView LCD displays up to 64 units.
The RS-232C is used for the communication between the PC and
f rst display via a 15' serial cable, while the CAN bus is used for the
LCD displays. They may be cascaded together via Cat 5/6
and daisy chained up to 1,000 meters.
Specifically designed for our displays, the MCS input module
saves additional space/power and is covered by the 2-year
standard warranty.
( Multi-Display Control )
***
For additional information and specs on MCS, please contact your supplier.
Audio Power
out - in - in
Video PC
HDMI S-Video BNC
MCS
VGA DVI-D Link in out set
***
For the MCS option, casing depth will be changed.