Eizo DuraVision FDU2101 / FDU2101T 取扱説明書 - Manual (Page 18)

6
●
How to assemble
1.
Fasten the M6 screws (8 locations) through the monitor into the assembly
enclosure.
Attention
• The mounting screws are not supplied. Prepare screws (8 pcs.) for the assembly enclosure.
• Install the monitor away from the compasses. Otherwise, an error may occur in the compasses.
The safe distance between the monitor and compass is shown below.
- Standard compass: 1.3 m or more
- Steering compass: 0.7 m or more
434 (17.1) ±0.3 (0.01)
469 (18.5)
223 (8.8)
484 (19.1) ±0.3 (0.01)
503 (19.8)
407.9 (16.1)
95.2 (3.75) 19.5 (0.77)
Mounting holes (8 locations)
Φ6.5 (0.26) ±0.05 (0.002)
or M6
Screw (M6)
●
Mounting conditions
Panel opening dimensions / Clearance between the screw holes
unit : mm (inch)