Electro-Chemical Devices (ECD) CA6 Filtration Unit User Manual
Page 5
5
UNPACKING THE INSTRUMENT
Your Electro-Chemical Devices instrument has been carefully packaged to protect it from damage during
shipment and dry storage. Upon receipt please follow the procedure outlined below.
1.
Before unpacking, inspect the condition of the shipping container to verify proper handling by
the carrier. If damage is noted, save the shipping container as proof of mishandling for the
carrier.
2.
Check the contents of the shipping container with the items and quantities shown on the
packing list. Immediately report any discrepancies to ECD.
3.
Save the original packing material until you are satisfied with the contents. In the event the
product(s) must be returned to ECD, the packing material will allow you to properly ship it to
ECD.
4.
Familiarize yourself with the instrument before installation, and follow proper installation and
wiring procedures.
DANGER ELECTRIC SHOCK RISK
SOLENOID VALVE AND TIMER OPERATE AT 220 VAC or
optional 110 VAC