Elfa Closet Rod Holder and Rod - Manual

www.elfa.com
Sida 6 av 13
Closet Rod
Insert closet rod holder and closet rod
Insert the closet rod holder
Insert the closet rod holder into the slot in
the bottom of the bracket click in.
1
2
Snap in the closet rod
Tap the end caps into both ends of the closet rod.
Snap the closet rod into the closet rod holder.
Installing closet rods that share
a closet rod holder
First, install joined rods in the center of the
closet rod holder, then place the outer ends in
the closet rod holder.
Tap the end caps only into the non-joined ends
of each closet rod. Adding end caps to the joined
ends creates a gap.
Elfa Lumi AB
Elfagatan 5, 593 87 Västervik
Tel: +46 392-389 10 Fax: +46 392-361 25. E-mail: [email protected]