Delta 28-348 - Manual (Page 7)

7
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.
Fig. 2
1. Remove the cardboard box from around the packing
skid (A) Fig. 2.
2. Remove the two bolts (B) Fig. 2, with a 1/2" wrench,
that attach the motor to the packing skid (A)
Fig. 3
3. Remove the bolts that attach the stand (C) Fig. 3,
and the saw (D) to the the packing skid (A) with a 3/8"
wrench.
A
C
D
A
B