DXG Technology DXG Digital Camera - Manual (Page 49)

47
picture of this location. When you open the same picture again, both the same pictures will
be erased. If different, the previous two pictures will be covered again when opening the
third picture. You will win the game when all the pictures are erased. The screen will appear
message “You win”, and then return to the Memory menu. The lower left corner of the game
screen will display the number of erased pictures. The lower right corner of the games screen
will display the elapsed time of the game.
6. Press the Mode button , and the camera system will switch to mode selection interface.
3.9.4 Gobang
The Gobang game is designed to develop your thinking ability through aligning five pieces in a
line.
1. Use the joystick (Left/Right button ) to scroll through the Game mode, and press OK
to enter the Game menu. Use the joystick (Up/Down button ) to select the Gobang
option.
2. Press the OK to enter the Gobang menu.
3. Under the Gobang menu mode, use the joystick (Up/Down button ) to select Start option,
and press OK to enter the game. Press the Browse to return to the Gobang menu.
4. Under the Gobang menu mode, use the joystick (Up/Down button ) to select Exit option,
and press OK to exit the Gobang menu to return to Game Menu.
5. Use the joystick (Left/Right Up/down button) to move the light mark while playing
games. Press the OK to put the black piece on the place which the light mark is. After
you put one piece, your opponent (camera) also puts one white piece. When you put five
black pieces in a line, you win. The screen will appear message “You win”, and then return
to the Gobang menu. Instead, when the camera puts five white pieces in a line, you lose. The
screen will appear message “You lose”, and then return to the Gobang menu. When the
board is full of pieces and you tie with the computer, the screen will appear message “Draw”,
and then return to the Gobang menu. The lower right corner of the game screen will indicate
that you use the black piece, and the camera use the white piece.
6. Press the Mode button , and the camera system will switch to mode selection interface.