ETA Profi - Manual (Page 16)

17 16/ 35
II. EQUIPMENT AND ACCESSORY OF ETA VACUUM CLEANER – LINE0467 (pic. 1)
A – vacuum cleaner
A1 – suction opening A6 – outlet cover
A2 – suction space lid A7 – cord holder
A3 – lid closure A8– supply cord
A4 – safety valve A9 – The START/STOP button
A5 – handle A10 – wheels
B – accessory
B1 – floor nozzle B5 – slit nozzle
B2 – suction hose B6 – dust filter
B3 – suction tubes B7 – suction micro filter
B4 – cushion nozzle with brush B8 – nozzle for vacuuming hard floors
III. PREPARATION AND USE
Remove all packaging material, remove the vacuum cleaner and accessory. Plug the fork of
the supply cord A8 into the el. plug. Assemble the accessory of the cleaner B1, B2, B3 (pic.
2, 3). Floor nozzle B1 is intended for vacuuming carpets or smooth floors (obr. 4). If the floor
nozzle is equipped with a brush, you may slide it out when vacuuming hard floors. The slit
nozzle B5 may be used for vacuuming hard–accessible places (pic. 5). The cushion nozzle
B4 may be used for vacuuming different kinds of furniture (pic. 6). Turn the vacuum cleaner
on/off by pressing the switch button A9 marked with “ ” symbol (pic. 7). You may control
the suction power by the handle regulation on the hose B2 (pic. 8). After finishing cleaning,
unplug the cleaner from the el. outlet. Curl the supply cord into an oval shape and put in the
holder A7 (pic. 9). The cleaner may be held by the holder A5 and carried over obstacles
(e.g. doorsills, steps. We recommend turning the cleaner off when carrying.
Dust filter cleaning
If the suction power of the cleaner decreases during operation, the dust filter needs to be
cleaned. Tip out the lid A2 of the cleaner by pressing closure A3 (pic.10). Then pull the front
of the dust filter B6 out of the holder (pic. 11). Slide out the lath from one side of the filter (pic.
12), the textile filter will open and the dust can be dumped. The filter needs to be dusted (pic.
13). Put the lath on reversely. Slide the front of the dust filter into the holder in the suction
space of the vacuum cleaner and push all the way. Press to close the lid of the cleaner.
Important precautions
Do not wash, soak etc. the textile dust filter, do not use a damaged textile dust filter!
Suction micro filter
After filling the dust filter approx. 5 times, it needs to be changed for a new one. Loosen the
arrest ring by turning it in the direction of an arrow and remove it (pic. 14). Remove the used
micro filter and dispose it with common house waste. Put the new filter in reversely and fasten
it with the arrest ring. Make sure that the bearing area and sealing elements are functional.
ATTENTION: Neglecting the replacement of the micro filters may lead to failure of the
vacuum cleaner!
For trouble–free operation of the vacuum cleaner, please use the
tested micro–filters recommended by the producer.
GB