ETA Fresco - Manual (Page 18)

B – stand D – rotary bowl
B1 – lifting arm E – beaters
B2 – arm lock button F – kneading hooks
B3 – blender lock button G – dip blender
C – lid H – holder
C1 – filler hole cap I – spatula
III. PREPARATION FOR USE (Figs. 1, 2)
Remove all packing items and unpack the mixer and its accessories. Remove all
possible adhesion foils, stick-on labels or paper from the appliance. Before using the
appliance for the first time, wash all parts coming in contact with the food in hot water with
a suitable detergent, rinse them thoroughly in clean water and wipe them or leave them to
dry.
Using the speed settings (A1, A2)
0 – switch off
1 to 4 – speed settings (to be used for whipping, mixing and kneading)
– blending speed setting (the dip blender is activated by depressing the MAX
button)
the MAX button – the motor is running at its highest power and it keeps running while the
A2 button is pushed.
– the button can be used at any speed setting except 0
Stand (B) – applicable for ETA 2047
Lifting the arm – push the B2 button and lift the arm B1. To lower the arm, push the B2
button another time. The arm will move downwards and lock (a click will
be heard).
Rotary bowl (D) – applicable for ETA 2047
Place the rotary bowl in the stand B. To remove the bowl, follow the above procedure in
the reverse order.
Applying and removing the lid (C) – applicable for ETA 2047
Place the lid on the lifting arm B1 by sliding the lugs on the lid in the counter grooves on
the arm. Push the lid as far as it goes. To remove the lid, follow the above procedure in the
reverse order.
The filler cover (C1) – applicable for ETA 2047
By pushing the filler cover aside, the filler hole can be used to add fluids or solid food in the
bowl D while the motor unit A is running.
Holder (H) – applicable for ETA 1047, ETA 2047
The holder is deigned to hold the mixer and tools. Fit the holder on the wall using the
supplied dowels and screws.
Make sure that there is no electric, telephone, plumbing fitting under the plaster at the
place of mounting the holder.
IV. USING ACCESSORIES (Figs. 1 and 2)
Take please the following tips for examples and inspiration. Rather than giving instructions,
the aim is to show different ways how to process food. The processing times are never
longer than a few minutes. It is advisable to break work from time to time, switch the
appliance OFF (the 0 setting) and clean any sticking food off the tolls or the bowl or lid
(see please I. SAFETY WARNING).
18
GB