ETA Fresher User Manual

Page 16

Advertising
background image

Notes

– We recommend suspending work once in a while and removing the pulp which has

collected on the sieve or the lid (see par.

I. SAFETY PRECAUTIONS).

– The preparation times depend on amount, kind and quality of the food used and range

in tens of seconds. Maximum time of continuous operation is 2 minutes, then leave the

appliance rest and cool down for approx. 2 min.

– If you need to empty the pulp container

F during the process, turn off the appliance first.

Lift the container, tilt it and remove it. Replace it reversely after emptying.

– The appliance features a feedback regulation which maintains the set motor revolutions

independently of the load. In case of relieving it after a big load, the revolutions may

fluctuate shortly. This is absolutely normal and is not a reason to take the device back.

– If the appliance becomes stuck, turn it off immediately and clean it.

Good tips

– To get more juice, push soft foods slowly.

– To keep as many vitamins as possible, consume the juice soon.

– In case you need to keep the juice for several hours, put it in a refrigerator. The juice will

stay fresh longer if you add a few drops of lemon juice.

– Water down the juice for children with same amount of water.

IV. MAINTENANCE

Unplug the appliance from the electric outlet before each maintenance and

cleaning by pulling out the fork of the supply cord from the socket! Do not use any

abrasive cleaning agents (e.g. sharp objects, diluents or other dissolvents)! Clean

the propulsion unit

A and shaft A2 with a soft, damp cloth. Wash the other removable

accessories immediately after use in hot water with soap, rinse them with clean water and

let dry (do not use the dish washer).

Pay special attention when cleaning the sieve as it may cause injury. The sieve

C may

be easily cleaned with the brush

H. Some fruits may discolour the accessories. This has,

however, no effect on the functions of the appliance and this discoloration will usually

disappear with time. Never dry the plastic die-cast over a heat source (e.g.

stove, el./gas

cooker).

V. STORAGE

Store the appliance on a dry place, out of reach of children and persons sui juris.

VI. ENVIRONMENT

If the dimensions allow, there are marks of materials used for production of packing,

components and accessories as well as their recycling on all parts. The symbols specifi

ed on the product or in the accompanying documentation mean that the used electrical

or electronic products must not be disposed of together with municipal waste. For proper

disposal, hand them over at the special collection places where they will be accepted free

of charge. Suitable disposal of the product can help to maintain valuable natural resources

and to prevent possible negative impacts on the environment and human health, which

could be the possible consequences of improper waste disposal. Ask for more details at

the local authority or at a collection site. Fines can be imposed for improper disposal of this

type of waste in agreement with the national regulations.

16

GB

Advertising