ETA Tonny - Manual (Page 18)

– Never immerse the appliance into water (even its parts)!
– Do not use the appliance for heating a room! It is not intended for outdoors use.
– The appliance must not be used in damp or wet environment and in any environment with
the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and
other flammable or volatile materials are stored).
– Do not place any objects on the appliance.
– Never leave the appliance unsupervised and check it during the whole time of preparing meals!
– When the appliance is switched on for the first time, short and slight smoke can come out
that does not mean any defect and it is not a reason for claiming a defect of the appliance.
– Do not place the appliance on unstable, fragile or flammable surfaces (e.g. glass, paper,
plastic, wooden varnished boards and various fabric/table cloths).
– Use the appliance in the working position only at places with no risk of turning over and in
sufficient distance from heat sources (e.g. heater, stove, cooker, oven, grill), flammable
objects (e.g. curtains, drapes, etc.) and wet surfaces (e.g. sinks, wash basins, etc.).
– The space above the toaster must be free. It has to be made sure that air can circulate
around the toaster.
– Do not put any sugar–coated or fatty pastry in the toaster as it tends to melt and run.
– Never switch on the toaster in advance as it heats immediately!
– Never cover the toasting slot and do not put fingers or metal tools into it.
– Clean the breadcrumbs container regularly, thus you will prevent possible fire.
– Do not toast bread or pastry wrapped e.g. in an aluminum foil, paper, etc.
– It is not permissible to adjust the surface of the extra attachment (e.g. self–adhesive
paper, foils, etc.)!
– Before preparation, remove possible packages from food (e.g. paper, PE bag, etc.)
– The product is equipped with a safety fuse which protects it against overheating.
– Spontaneous ignition of prepared food may occur during grilling. Unplug the appliance
from the mains and put out the fire in case of sudden ignition.
– To avoid injury (burning), do not move the appliance when it is hot!
– With regards to fire safety, the appliance complies with EN 60 335–2–6. Within the
intention of the standard, this appliance can be operated on a table or on a similar surface
while safe distance must be maintained from flammable materials of at least 500 mm
in the direction of the main heat radiation and 100 mm in the other directions.
– Never put the power cord on hot surfaces or do not let it hang over the edge of a table
or a work top. Plugging or pulling the power cord e.g. by children can result in tilting over
or drawing the appliance down and serious injury!
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
– Check the condition of the power cord of the appliance regularly.
– In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.
– WARNING: There is a risk of injury in case of incorrect use (not in accordance with
the manual) of the appliance.
– WARNING: Do not use the appliance with a program, time switch or any other part that
turns the appliance on automatically as there is a risk of fire if the appliance is not covered
or placed properly.
– All text in other languages and pictures shown on the packaging, or the product itself,
are translated and explained at the end of this language mutation.
GB
18 / 37