Ethereal CS-HDSCOAX - Manual (Page 6)

Page 3
■
Package Contents
①
Main unit NO.1. TRANSMITTER.
② Main unit NO.2. RECEIVER.
③ Operating instructions. CS-HDSCOAX .
④ 2x 5VDC power supply P/N_VDC0502.
(One for Transmitter, one for Receiver)
⑤ 1xIR TX unit. (IR emitter cable)
⑥ 1xIR RX unit. (IR receiver unit)
■
HDMI Connections and Operations
1) Connect the HDMI input source to TRANSMITTER.
2) Connect a COAX cable from COAX output of TRANSMITTER to COAX input
of RECEIVER.
3) Connect the HDMI to Display.
■
IR Connections and Operations
1) Determine which way that you want the IR signal to flow. Connect the RX
unit at the controller side and the TX emitter at the controlled side.
2) Connect the IR Receiver (unit with stereo mini plug) to the RX port
3) Connect the IR emitter (mono mini plug) to the TX port
 Attention: Please insert and extract cables gently.
■
DIP Switch Setting Instructions
Note: “0” is up and :1: is down