Exacq LC-Series Quick Start Guide - Manual

LC Quick Start LC Quick Start
www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
www.e x acq.com
+1.317.845.5710
+44.1438.310163 USA (Corporate Headquarters)
Europe/Middle East/Asia
4
NTSC/PAL
An exacqVision LC system does not autodetect whether a camera uses the NTSC or PAL video standard. If the video displayed by an
exacqVision LC system does not appear as expected (in grayscale or with black lines, for example), it’s possible that the incorrect
standard has been selected. To verify that the correct standard is selected, complete the following steps:
1. Open a Terminal window.
2. Stop the exacqVision Server service by typing sudo service edvrserver stop.
3. Open the Dahua Control Center by typing sudo /usr/local/dahua/DahuaControlCenter.
4. From the Settings menu, select Video Standard, and then select the appropriate standard.
5. Close the Dahua Control Center.
6. Restart the exacqVision Server service by typing sudo service edvrserver restart.
©2014 ExacqTechnologies #
500-00041
1
Connections
Main Back Panel Connections
*When using the cables included with the system, the cable with the yellow connector is for video out.
On 16-input systems, the yellow video out cable will not work if plugged into the connector containing inputs 9-16 (7b)
Item # Description Notes
1 PS-2 Port Compatible mouse and keyboard
2 USB (x6)
Compatible keyboard, mouse, USB memory device, or DVD burner;
mouse included with system; middle button on mouse activates onscreen keyboard
3 VGA Monitor
4 DVI Monitor
5 10/100/1000 Ethernet
6 Audio In/out Pink (unused), green (line level stereo audio out), blue (audio in)
7
Video In, Video Out*
Audio In 8-input systems: Inputs 1-8 and one output*; blue connector unused (not shown)
16-input systems: Inputs 1-8 and one output* (7a); inputs 9-16 (7b)
8 Power Button
2a 1 4 3 7a 5 6 7b 8 2b 2c