Exacq exacqVision Edge/ISD Quick Start Guide - Manual

exacqVision Edge/ISD Quick Start Guide
www.e x acq.com Page 1 of 7
10/17/2014
Introduction
exacqVision Edge is a variation of the standard exacqVision Server application that operates on a compatible ISD camera. It can
record video from the local camera directly to the SD memory card in the camera. The exacqVision Client application can connect to
any combination of embedded and standard servers simultaneously; however, the exacqVision Web Service cannot be supported on
an embedded camera because of processing requirements.
Requirements

A one-channel license from Exacq Technologies must be obtained for each Edge-enabled camera. (A standard Edge license
part number is EDGE, and an Edge Plus license part number is EDGEP.)

exacqVision Edge is compatible with all ISD cameras:

The camera must be running version 1.2 firmware or later.

An SDHC Class 10 or better SD card or any SDXC card, purchased separately, is required for each camera.
NOTE: Up to 2GB of space on each card is reserved for exacqVision Edge operations and cannot be used for
exacqVision Edge data storage.
Block Diagram