Exacq exacqVision Edge/Vivotek Quick Start Guide - Manual

exacqVision Edge/Vivotek Quick Start Guide
www.e x acq.com Page 1 of 5
10/17/2014
Introduction
exacqVision Edge is a variation of the standard exacqVision Server application that operates on a compatible Vivotek camera. It can
record video from the local camera directly to the SD memory card in the camera or remote drives. The exacqVision Client
application can connect to any combination of Edge and standard servers simultaneously.
Requirements

A one-channel license from Exacq Technologies must be obtained for each Edge-enabled camera. (A standard Edge license
part number is EDGE, and an Edge Plus license part number is EDGEP.)

exacqVision Edge is compatible with Vivotek FD8135H and FE8172 cameras:

The camera must be running a version of firmware that supports Vivotek VADP applications. Supported firmware varies
between the camera models. Contact Vivotek for more information.

An SDHC class 10 or better SD memory card no larger than 32GB, purchased separately, is required for each camera.
NOTE: Up to 2GB is reserved for exacqVision Edge operations and cannot be used for exacqVision Edge data storage.

A separate web server computer running the exacqVision Web Service application is required for mobile or web clients
connecting to Edge servers.
Block Diagram